翻訳と辞書
Words near each other
・ Lithium tantalate
・ Lithium tantalate (data page)
・ Lithium Technologies
・ Lithium tetrachloroaluminate
・ Lithium tetrafluoroborate
・ Lithium tetrakis(pentafluorophenyl)borate
・ Lithium tetramethylpiperidide
・ Lithium titanate
・ Lithium Tokamak Experiment
・ Lithium triborate
・ Lithium triethylborohydride
・ Lithium tungstate
・ Lithium vanadium phosphate battery
・ Lithium, Missouri
・ Lithium-ion battery
Lithium-ion capacitor
・ Lithium-ion flow battery
・ Lithium–air battery
・ Lithium–silicon battery
・ Lithium–sulfur battery
・ Lithium–titanate battery
・ Lithivm
・ Litho Supplies
・ Lithoautotroph
・ Lithoautotrophy
・ Lithobates
・ Lithobatrachus
・ Lithobiidae
・ Lithobius
・ Lithobius forficatus


Dictionary Lists
翻訳と辞書 辞書検索 [ 開発暫定版 ]
スポンサード リンク

Lithium-ion capacitor : ウィキペディア英語版
Lithium-ion capacitor

A lithium-ion capacitor (LIC) is a hybrid type of capacitor out of the family of the supercapacitors. Activated carbon is used as cathode. The anode of the LIC consists of carbon material which is pre-doped with lithium ion. This pre-doping process lowers the potential of the anode and allows a relatively high output voltage compared with other supercapacitors.
== Concept ==

A lithium-ion capacitor is a hybrid electrochemical energy storage device which combines the intercalation mechanism of a lithium ion battery with the cathode of an electric double-layer capacitor (EDLC). The packaged energy density of an LIC is approximately 20 Wh/kg generally four times higher than an EDLC and five times lower than a lithium ion battery. The power density however has been shown to match that of EDLCs able to completely discharge in seconds. The negative electrode (cathode) often employs activated carbon material at which charges are stored in an electric double layer that is developed at the interface between the carbon and the electrolyte.
The positive electrode (anode) was originally made with lithium titanate oxide, but is now more commonly made with graphitic carbon material to maximize energy density. The graphitic electrode potential initially at -0.1 Volts versus SHE (standard hydrogen electrode) is lowered further to -2.8V by the intercalation of lithium ions. This process step is referred to as doping and often takes place in the device between the anode and a sacrificial lithium electrode. The pre-doping process is critical to the device functioning as it can significantly affect the development of the Solid Electrolyte Interphase layer. Doping the anode lowers the anode potential and leads to a higher output voltage of the capacitor. Typically, output voltages for LICs are in the range of 3.8–4.0 V but are limited to a lower voltage of 1.8-2.2Volts. If the voltage is brought any lower lithium ions will deintercalate more rapidly than they can be restored during normal use. Like EDLCs, LIC voltages vary linearly adding to complications integrating them into systems which have power electronics that expect the more stable voltage of batteries. As a consequence, LICs have a high energy density, which varies with the square of the voltage. The capacitance of the anode is several orders of magnitude larger than that of the cathode. As a result, the change of the anode potential during charge and discharge is much smaller than the change in the cathode potential.
The electrolyte used in an LIC is a lithium-ion salt solution that can be combined with other organic components and is generally identical to that used in lithium ion batteries.
A separator prevents direct electrical contact between anode and cathode.

抄文引用元・出典: フリー百科事典『 ウィキペディア(Wikipedia)
ウィキペディアで「Lithium-ion capacitor」の詳細全文を読む



スポンサード リンク
翻訳と辞書 : 翻訳のためのインターネットリソース

Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.